Wiring Loom for Turnout Motors for N OO & O Gauge like Peco PL-34
These are made by ourselves but are the same as the Peco PL-34 wiring loom.
They are suitable for Peco turnout/point motors: PL-10 & PL-10E.
One loom consists of 1x Red wire, 1x Black wire and 1x Green common wire. The green common wire has two connectors which push onto both terminals on one side of the motor. The red and black wires have one connector and these go to the opposite side of the motor to change the polarity. The loom should be wired to a passing contact switch. See wiring diagram in the photos.
The other end of the wires are pre soldered, ready for you to connect to a screw terminal etc.
The length of each wire in the loom is 450mm.
Brand new in packet.
These are made by ourselves but are the same as the Peco PL-34 wiring loom.
They are suitable for Peco turnout/point motors: PL-10 & PL-10E.
One loom consists of 1x Red wire, 1x Black wire and 1x Green common wire. The green common wire has two connectors which push onto both terminals on one side of the motor. The red and black wires have one connector and these go to the opposite side of the motor to change the polarity. The loom should be wired to a passing contact switch. See wiring diagram in the photos.
The other end of the wires are pre soldered, ready for you to connect to a screw terminal etc.
The length of each wire in the loom is 450mm.
Brand new in packet.